The SW3 power supply is a low cost, regulated switching power supply. It is designed specially to
supply power to low current DC devices such as mortise locks, cylindrical locks and electric strikes.
The SW3 comes in a 8â€ x 7â€ x 3.5â€ sturdy metal enclosure.
The door loop is a low cost method of transferring low voltage power from the door frame to the
locking device. Door loops are commonly used with electric pullback devices.
CONCEALED DOOR LOOP (CDL)
The patented Concealed Door Loop (CDL) is low cost method of transferring low voltage power from
the door frame to the locking device. Whereas typical door loops are surface mounted and remain
constantly visible, the CDL slides into the door and/or frame completely concealing itself when the door
is closed. Common applications include: use with continuous hinges, storefront conditions where offset
hinges are used, and for most applications where ETH hinges or conventional door loops would be used.
The CDLâ€™s aesthetic appeals will benefit retrofit and new installations alike.
The Energy Transfer Monitor Hinge (ETM) like the ETH hinge is the ideal way to pass low
voltage power from the hinge jamb to the lockset. There are no exposed wires, cables or
switches that can be tampered with and the hinge maintains the same appearance of a
conventional non-power transfer hinges. What distinguishes it from the ETH hinges is that it
has a concealed switching mechanism that monitors the position of the doors. We can modify
almost any hinge and we maintain a large inventory of most major hinge brands in various sizes
The Energy Transfer Pivot Hinge is available in the same wire configurations as the butt hinges. Itâ€™s a
great way to pass power from the hinge jamb to the door and have no exposed wires or cords. We
maintain an inventory of CAT modified Rixson M19 and CATâ€˜s own intermediate pivot hinge. The
customer may also supply their hinge for modification.
The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb
to the lockset without having any exposed wires. These hinges are commonly used with electric
mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch
pullback devices, door mounted card readers and low voltage door lights. We can modify almost
any hinge and we maintain a large inventory of most major hinge brands in various sizes and
Electrified latch pullback exit device modifications allows for remote keyless access control high
occupancy/high traffic condition where exit device are required. Common applications include
conditions such as hospitals, airports, school, churches and they are commonly specified in applications
that require automatic door openers. The device may be continuously energized allowing for a push/pull
condition if desired.
The exit device trim modifications are perfect for stairwell conditions or applications where electric
pullback of exit deviceâ€™s latchbolt is cost prohibitive or not required. This is especially practical in
applications where fire/life safety codes require a â€œfail safeâ€ condition which is not an option with
electrified latch pullback devices. Because the current draw is quite low, there is no need for a more
expensive power supply to provide the surge current.
The CL1 is high quality grade 1 cylindrical lock with the look and feel our customers have come to
expect from leading brands, but at a lower price. The CL1 is an ideal solution for that project
where a â€œbrand nameâ€ electrified products is not specified or required yet a high quality and
economical solution is desired. You can install this lock with the confidence of knowing that the CL
meets or exceeds the high standards of our other Grade 1 modifications.
The electrified cylindrical lock allows remote keyless access and egress control for standard commercial
use applications where security and safety are critical. Common applications include computer rooms,
meeting rooms, classrooms and interiors doors